How To Connect Firestick Remote To TV Volume [Updated 2024]

The Fire TV remote app can be used to control the Volume on your Fire TV device, but there are several steps you must take to set up your Fire TV device to listen and respond to the volume control commands sent from the remote app.

Once complete, you’ll be able to control your Fire TV device’s Volume from the Fire TV Remote App or from the built-in volume buttons located on the left side of the remote (when holding your Fire TV device in portrait orientation).

Methods To Connect Firestick Remote To Tv Volume

You can connect your Firestick remote to your TV’s Volume in a few different ways. The first and most obvious method is to use the HDMI port on the back of your TV. You may need to use an adapter if you have an older TV. Another option is to use the optical audio output on your TV.

This is usually found on the side or back of the TV. You will need an optical cable for this method. Connect one end of the cable to the optical audio output on your TV, and then plug the other end into the headphone jack on your remote.

Next, turn up the Volume using both your remote and the TV’s buttons until it reaches a comfortable level. To disconnect from this connection, unplug the two cables.

1) Use Your Phone

how to connect firestick remote to tv volume

Just because you’re out of the house doesn’t mean you have to miss an episode of your favourite show! Using your smartphone, follow these steps. 

  1. Install and open FireStick Remote for iOS or Android on your device. 
  2. Tap the app button at the bottom of the screen and connect it to your Amazon account by logging in with your Amazon username and password.
  3. Now you can control the volume of your television using this app! You can also use this app to change channels and switch between video sources.

2) Use Another FireTV/Stick Remote

how to connect firestick remote to tv volume

If you have another remote for your Amazon FireTV or Stick, the good news is that you can easily use it on your device without needing a pairing code. One important thing to note is that this doesn’t work with third-party remotes and some universal remotes.

You also might need to move back and forth between the two remotes when using volume controls because they’re not always mapped in the same way. Use Alexa: We know you love your voice assistant! You can now use Alexa to control your volume by saying, turn up/down the volume.

3) Use A Bluetooth Speaker

how to connect firestick remote to tv volume

One way to connect your firestick remote to the tv volume is by using a Bluetooth speaker. Just place the speaker near the tv, pair it with your device, and you’re all set! Some Bluetooth speakers even have their dedicated app for controlling playback or giving voice commands to your media player.

You can also use any other speaker or audio device with a headphone jack on one end and plug into an aux-in on the back of your television.

4) Use An Alexa device

how to connect firestick remote to tv volume

First, connect your Alexa device to the same wifi network as your Echo, Echo Dot, or Echo Show. Then say Alexa, discover my devices.

You will see all the devices on your network, and then use the left and right buttons on your Alexa device remote control to find the device you want. Once you have found the correct device, click pair, and you should be connected!

5) Use An HDMI Switch

how to connect firestick remote to tv volume

An HDMI switch is inexpensive and the simplest solution to fix your volume issues. If you don’t have one yet, they typically run around Rs. 1000.

You plug your streaming device’s HDMI cable into the input on the switch, then plug in your TV’s cables as usual into the outputs. The great thing about this is that it saves time and makes for a much simpler wiring job!

Also visit: A Guide to HTML5 and Online Casino Slots

How To Test The Connection

  • 1. To test the connection, press and hold the Home button on your Fire TV Stick remote for 5-7 seconds. 
  • 2. If the Menu bar appears at the top of the screen, then your remote is successfully connected. 
  • 3. If the Menu bar does not appear, your remote may not be properly paired with your Fire TV Stick. 
  • 4. To fix this, try re-pairing your remote by pressing and holding the Home button for 10 seconds. 
  • 5. If that doesn’t work, try restarting your Fire TV Stick and your remote by unplugging them from power for 30 seconds and then plugging them back in. 
  • 6. Once you’ve reconnected your Fire TV Stick remote, repeat steps one through four above to confirm that it’s paired correctly. If you still can’t get the Menu bar to show up, contact Amazon customer service for assistance troubleshooting.

Can Fire Stick Control TV Volume?

If you have a Fire Stick and a compatible TV, you can use your Fire Stick remote to control the Volume on your TV. To do this, you’ll need to connect your Fire Stick to your TV. Once connected, you can hold the Home button on your Fire Stick remote for three seconds.

This will bring up the menu bar on your TV screen. You can use the up and down arrows to navigate the Volume icon. You can then use the +/- buttons on your remote to adjust the Volume. Make sure to follow these steps whenever you want to change the Volume on your TV with your Fire Stick remote.

It doesn’t matter what app you’re using on your Fire Stick. The home button has always been used to take you back to the main interface of your device – in this case, and it takes you back to the main interface of your TV so that you can adjust the Volume at any time.

Frequently Asked Questions

Q1. Should You Unplug Your Fire Stick When Not In Use?
Ans. If you’re not using your Amazon Fire Stick, it’s a good idea to unplug it. This is especially true if you’re not using it for an extended period. Doing so can help conserve battery life and prevent accidental damage.

Q2. Can you Use Your Fire Stick On Someone Else’s TV?
Ans. If you want to use your Fire Stick on someone else’s TV, you’ll need to connect the remote to the TV. Here’s how – Connect the HDMI cable from your TV to the back of your Fire Stick. 

– Turn on your TV and find a show that is playing or a channel you like 

– Press and hold the Volume Down button for 3 seconds until the blue light flashes twice, then release it. 

– The blue light will now be solid when connected successfully.

Q3.How Do You Know When Your Fire Stick Needs To Be Replaced?
Ans. If your Fire Stick is over three years old, it’s probably time for a replacement. Even if it’s still working, the newer models have updated features and faster processors. A new Fire Stick will also have a warranty if anything goes wrong.


To connect your Amazon Fire TV Stick to your TV’s HDMI port, firstly, ensure that both devices are turned on. If your TV has an HDMI-CEC feature, you may need to enable it for the Fire TV Stick to work properly. Once both devices are on, use the Fire TV Stick remote to navigate the Settings menu. Select the Controller Settings option and the Add or Connect Controller option. Choose the controller you’re using from the list that appears and follow the on-screen instructions to complete the connection process.

Leave a Comment